Twaveform; Accumulate - HP 16554A Programmer's Manual

TWAVeform

Selector :MACHine{1|2}:TWAVeform
The TWAVeform selector is used as part of a compound header to access the
settings found in the Timing Waveforms menu. It always follows the
MACHine selector because it selects a branch below the MACHine level in the
command tree.
Example
OUTPUT XXX;":MACHINE1:TWAVEFORM:DELAY 100E−9"

ACCumulate

Command
:MACHine{1|2}:TWAVeform:ACCumulate <setting>
The ACCumulate command allows you to control whether the waveform
display gets erased between each individual run or whether subsequent
waveforms are allowed to be displayed over the previous ones.
<setting> {0|OFF} or {1|ON}
Example
OUTPUT XXX;":MACHINE1:TWAVEFORM:ACCUMULATE ON"
TWAVeform Subsystem
TWAVeform
13–7