Trace→Sequence - HP 68302 User Manual

Chapter 8: Menu Bar Commands
Trace→Sequence... (ALT, T, Q)
Trace→Sequence... (ALT, T, Q)
Traces program execution as specified in the Sequence Trace dialog box.
This command lets you set up a multilevel sequential trace specification that
works like this:
1
2
3
4
Note
The analyzer traces unexecuted instructions due to prefetching by the 68302
processor.
276
Once the trace starts, the analyzer stays on sequence level 1 until the
primary or secondary branch condition is found. (If a state satisfies both
primary and secondary branch conditions, the primary branch is taken.)
Once the primary or secondary branch condition is found, the analyzer
transfers to the sequence level specified by the "to" button.
The analyzer stays at the next sequence level until its primary or
secondary branch condition is met; then, the analyzer transfers to the
sequence level specified by the "to" button.
When the analyzer reaches the sequence level specified in Trigger On,
the analyzer is triggered.
During the above described operation, the analyzer stores the states
specified in the Store text box.