Opattern - HP 16554A Programmer's Manual

Query :MACHine{1|2}:SLISt:MMODe?
The MMODe query returns the current marker mode selected.
Returned Format
[:MACHine{1|2}:SLISt:MMODe] <marker_mode><NL>
Example
OUTPUT XXX;":MACHINE1:SLIST:MMODE?"

OPATtern

Command
:MACHine{1|2}:SLISt:OPATtern
<label_name>,<label_pattern>
The OPATtern command allows you to construct a pattern recognizer term
for the O Marker which is then used with the OSEarch criteria when moving
the marker on patterns. Because this command deals with only one label at a
time, a complete specification could require several invocations.
When the value of a pattern is expressed in binary, it represents the bit
values for the label inside the pattern recognizer term. In whatever base is
used, the value must be between 0 and 2
more than 32 bits. Because the <label_pattern> parameter may contain
don't cares, it is handled as a string of characters rather than a number.
string of up to 6 alphanumeric characters
<label_name>
<label_pattern> "{#B{0|1|X} . . . |
#Q{0|1|2|3|4|5|6|7|X} . . . |
#H{0|1|2|3|4|5|6|7|8|9|A|B|C|D|E|F|X} . . . |
{0|1|2|3|4|5|6|7|8|9} . . . }"
Example
OUTPUT XXX;":MACHINE1:SLIST:OPATTERN 'DATA','255' "
OUTPUT XXX;":MACHINE2:SLIST:OPATTERN 'ABC','#BXXXX1101' "
SLISt Subsystem
32 − 1, since a label may not have
OPATtern
7–11