Master - HP 16554A Programmer's Manual

MASTer

Command :MACHine{1|2}:SFORmat:MASTer <clock_id>,
<clock_spec>
The MASTer clock command allows you to specify a master clock for a given
machine. The master clock is used in all clocking modes (Master, Slave, and
Demultiplexed). Each command deals with only one clock (J,K,L,M);
therefore, a complete clock specification requires four commands, one for
each clock. Edge specifications (RISing, FALLing, or BOTH) are ORed.
At least one clock edge must be specified.
<clock_id> {J|K|L|M}
<clock_spec> {OFF|RISing|FALLing|BOTH}
Example
OUTPUT XXX;":MACHINE2:SFORMAT:MASTER J, RISING"
Query
:MACHine{1|2}:SFORmat:MASTer? <clock_id>
The MASTer query returns the clock specification for the specified clock.
Returned Format
[:MACHine{1|2}:SFORmat:MASTer] <clock_id>,<clock_spec><NL>
Example
OUTPUT XXX;":MACHINE2:SFORMAT:MASTER? <clock_id>"
SFORmat Subsystem
MASTer
5–9