Remove; Takenbranch - HP 16554A Programmer's Manual

SWAVeform Subsystem

REMove

REMove
Command :MACHine{1|2}:SWAVeform:REMove
The REMove command clears the waveform display before building a new
display.
Example
OUTPUT XXX;":MACHINE1:SWAVEFORM:REMOVE"

TAKenbranch

Command
MACHine{1|2}:SWAVeform:TAKenbranch {STORe|NOSTore}
The TAKenbranch command allows you to control whether the states that
cause branching are stored or not stored. This command is only available
when the acquisition mode is set to manual.
Example
OUTPUT XXX;":MACHINE2:SWAVEFORM:TAKENBRANCH STORE"
Query
MACHine{1|2}:SWAVeform:TAKenbranch?
The TAKenbranch query returns the current setting.
Returned Format
[MACHine{1|2}:SWAVeform:TAKenbranch] {STORe|NOSTore}<NL>
Example
OUTPUT XXX;":MACHINE2:SWAVEFORM:TAKENBRANCH?"
8–10