Center; Haxis - HP 16554A Programmer's Manual

CENTer

Command MACHine{1|2}:SCHart:CENTer <marker_type>
The CENTer command centers the chart display about the specified markers.
The markers are placed in the SLISt subsystem.
<marker_type>
{X | O | XO | TRIGger}
Example
OUTPUT XXX;":MACHINE1:SCHART:CENTER XO"

HAXis

Command MACHine{1|2}:SCHart:HAXis
{STAtes,<state_low_value>,<state_high_value>|
<label_name>,<label_low_value>,<label_high_value>,
<state_low_value>,<state_high_value>}
The HAXis command allows you to select whether states or a label's values
will be plotted on the horizontal axis of the chart. The axis is scaled by
specifying the high and low values. The shortform for STATES is STA. This
is an intentional deviation from the normal truncation rule.
integer from –516096 to +516096 (HP 16554A), or from –1040384 to
<state_low_
+1040384 (HP 16555A), or from –2080768 to +2080768 (HP 16555D)
value>
integer from
<state_high_
(HP 16555A), or +2080768 (HP 16555D)
value>
a string of up to 6 alphanumeric characters
<label_name>
<label_low_
string from 0 to 2
value>
string from
<label_high_
value>
to +516096 (HP 16554A), +1040384
<state_low_value>
32 − − 1 (#HFFFFFFFF)
to 2
<label_low_value>
SCHart Subsystem
32
–1 (#HFFFFFFFF)
CENTer
9–5