Sformat Subsystem Sformat; Clock - HP 16554A Programmer's Manual

SFORmat Subsystem
SFORmat
SFORmat
Selector :MACHine{1|2}:SFORmat
The SFORmat (State Format) selector is used as a part of a compound
header to access the settings in the State Format menu. It always follows the
MACHine selector because it selects a branch directly below the MACHine
level in the command tree.
Example
OUTPUT XXX;":MACHINE2:SFORMAT:MASTER J, RISING"

CLOCk

Command :MACHine{1|2}:SFORmat:CLOCk<N> <clock_mode>
The CLOCk command selects the clocking mode for a given pod when the
pod is assigned to the state analyzer. When the MASTer option is specified,
the pod will sample all channels on the master clock. When the SLAVe option
is specified, the pod will sample all channels on the slave clock. When the
DEMultiplex option is specified, only one pod of a pod pair can acquire data.
The bits of the selected pod will be clocked by the demultiplex master for
labels with bits assigned under the Master pod. The same bits will be clocked
by the demultiplex slave for labels with bits assigned under the Slave pod.
The master clock always follows the slave clock when both are used.
an integer from 1 to 12
<N>
<clock_mode> {MASTer | SLAVe | DEMultiplex}
Example
OUTPUT XXX;":MACHINE1:SFORMAT:CLOCK2 MASTER"
5–6