Machine - HP 16554A Programmer's Manual

MACHine Subsystem

MACHine

Table 3-1 Machine Subsystem Parameter Values
Parameter
arm_source
pod_list
pod_num
arm_level
machine_name
res_id
new_text
state_terms
res_terms
MACHine
Selector :MACHine<N>
The MACHine <N> selector specifies which of the two analyzers (machines)
available in the module the commands or queries following will refer to.
Because the MACHine<N> command is a root level command, it will normally
appear as the first element of a compound header.
<N> {1|2}
Example
OUTPUT XXX; ":MACHINE1:NAME 'TIMING'"
3–4
Value
{RUN | INTermodule | MACHine {1|2}}
{NONE | <pod_num>[, <pod_num>]...}
integer from 1 to 12
integer from 1 to 11 representing sequence level
string of up to 10 alphanumeric characters
{<state_terms>|H|J} for state analyzer
or
{<state_terms>|EDGE{1|2}} for timing analyzer
string of up to 8 alphanumeric characters
{A|B|C|D|E|F|G|I| RANGE{1|2}|TIMER{1|2}}
{<res_id>[,<res_id>]...}
(the machine number)