Ocondition - HP 16554A Programmer's Manual

OCONdition

Command :MACHine{1|2}:TLISt:OCONdition {ENTering|EXITing}
The OCONdition command specifies where the O marker is placed. The
O marker can be placed on the entry or exit point of the OPATtern when in
the PATTern marker mode.
Example
OUTPUT XXX; ":MACHINE1:TLIST:OCONDITION ENTERING"
Query
:MACHine{1|2}:TLISt:OCONdition?
The OCONdition query returns the current setting.
Returned Format
[:MACHine{1|2}:TLISt:OCONdition] {ENTering|EXITing}<NL>
Example
OUTPUT XXX;":MACHINE1:TLIST:OCONDITION?"
TLISt Subsystem
OCONdition
14–11