Tposition - HP 16554A Programmer's Manual

TPOSition

Command MACHine{1|2}:SWAVeform:TPOSition
{STARt|CENTer|END|POSTstore,<percent>}
The TPOSition command allows you to control where the trigger point is
placed. The trigger point can be placed at the start, center, end, or at a
percentage of post store. The post store option is the same as the User
Defined option when setting the trigger point from the front panel.
The TPOSition command is only available when the acquisition mode is set to
manual.
integer from 1 to 100
<percent>
Example
OUTPUT XXX;":MACHINE2:SWAVEFORM:TPOSITION CENTER"
Query
MACHine{1|2}:SWAVeform:TPOSition?
The TPOSition query returns the current trigger setting.
Returned Format
[MACHine{1|2}:SWAVeform:TPOSition]
{STARt|CENTer|END|POSTstore,<percent>}<NL>
Example
OUTPUT XXX;":MACHINE2:SWAVEFORM:TPOSition?"
SWAVeform Subsystem
TPOSition
8–11