Ocondition - HP 16554A Programmer's Manual

OCONdition

Command :MACHine{1|2}:TWAVeform:OCONdition
{ENTering|EXITing}
The OCONdition command specifies where the O marker is placed. The
O marker can be placed on the entry or exit point of the OPATtern when in
the PATTern marker mode.
Example
OUTPUT XXX; ":MACHINE1:TWAVEFORM:OCONDITION ENTERING"
Query :MACHine{1|2}:TWAVeform:OCONdition?
The OCONdition query returns the current setting.
Returned Format
[:MACHine{1|2}:TWAVeform:OCONdition] {ENTering|EXITing}<NL>
Example
OUTPUT XXX;":MACHINE1:TWAVEFORM:OCONDITION?"
TWAVeform Subsystem
OCONdition
13–15