Range; Remove - HP 16554A Programmer's Manual

WLISt Subsystem

RANGe

RANGe
Command :WLISt:RANGe <time_value>
The RANGe command specifies the full-screen time in the timing waveform
menu. It is equivalent to ten times the seconds per division setting on the
display. The allowable values for RANGe are from 10 ns to 10 ks.
real number between 10 ns and 10 ks
<time_range>
Example
OUTPUT XXX;":WLIST:RANGE 100E−9"
Query
:WLISt:RANGe?
The RANGe query returns the current full-screen time.
Returned Format
[:WLISt:RANGe] <time_value><NL>
Example
OUTPUT XXX;":WLIST:RANGE?"

REMove

Command
:WLISt:REMove
The REMove command deletes all waveforms from the display.
Example
OUTPUT XXX;":WLIST:REMOVE"
4–12