Resource - HP 16554A Programmer's Manual

{<state_terms>|H|J} for state analyzer
<res_id>
{<state_terms>|EDGE{1|2}} for timing analyzer
string of up to 8 alphanumeric characters
<new_text>
<state_terms> {A|B|C|D|E|F|G|I| RANGe1 | RANGe2 | TIMer1 | TIMer2}
Example
OUTPUT XXX;":MACHINE1:RENAME A,'DATA'"
Query :MACHine{1|2}:RENAME? <res_id>
The REName query returns the current names for specified terms assigned
to the specified analyzer.
Returned Format
[:MACHine{1|2}:RENAME] <res_id>,<new_text><NL>
Example
OUTPUT XXX;":MACHINE1:RENAME? D"

RESource

Command
:MACHine{1|2}:RESource {<res_id>[,<res_id>]...}
The RESource command allows you to assign resource terms A through G
and I, Range 1 and 2, and Timer 1 and 2 to a particular analyzer.
In the timing analyzer only, two additional resource terms are available.
These terms are Edge 1 and 2. These terms are always assigned to the
machine that is configured as the timing analyzer.
In state analyzers that are not configured for high speed, terms H and J are
also available. H and J are not available to timing or high-speed analyzers.
<state_terms> for high-speed state analyzer or
<res_id>
{<state_terms|H|J} for 100-MHz state analyzer or
{<state_terms>|EDGE{1|2}} for timing analyzer
<state_terms> {A|B|C|D|E|F|G|I|RANGe1| RANGe2 | TIMer1|TIMer2}
MACHine Subsystem
RESource
3–9