About This Manual - Thermo Scientific Vanquish VF-D20 Operating Manual

1 • Using this Manual
1.1

About this Manual

Page 10
This manual describes the functional features and operating principle of
your Vanquish™ detector and provides instructions for installation, set
up, start up, shut down, operation, maintenance and troubleshooting.
The layout of this manual is designed to provide quick reference to the
sections of interest to the user. To obtain a full understanding of your
detector, read this manual thoroughly.
This manual also contains safety messages, precautionary statements,
and special notices that can prevent personal injury, damage to the
detector, or loss of data when followed properly.
Note the following:
•
The detector configuration may vary; therefore, not all descriptions
necessarily apply to your particular detector.
• If some detail applies to only one model or variant, the model or
variant is identified by name.
•
Illustrations in this manual are provided for basic understanding.
They can vary from the actual model of the detector or component.
However, this does not influence the descriptions. No claims can be
derived from the illustrations in this manual.
• The detector is referred to as detector or charged aerosol detector in
this manual. If other detector types are referenced, they are
identified by name.
The descriptions in this manual assume that the detector is installed in
the Vanquish system stack. If this is not the case, additional hardware is
required and must be ordered separately. The information in this
manual applies correspondingly.
Vanquish Charged Aerosol Detectors Operating Manual