Thermo Scientific Vanquish VF-D20 Operating Manual page 77

Follow these steps
Connecting the Capillary Between Column and Nebulizer
5.6.5.1
Preparations
Follow these steps
Vanquish Charged Aerosol Detectors Operating Manual
Route and connect the capillary to the nebulizer as required by the
system arrangement:
•
Connecting the capillary between column and nebulizer (see
section 5.6.5.1, page
–or–
• Connecting the capillary between flow cell and nebulizer (see
section 5.6.5.2, page
Follow the respective instructions.
If the charged aerosol detector is the only detector in the Vanquish
system flow path, connect the inlet capillary between column and
nebulizer.
See section 5.6.5, page
1. Connect the capillary to the column outlet.
2. Route the inlet capillary from the column compartment through the
guide hole in the detector enclosure to the nebulizer. Use the guide
hole that is next to the column compartment.
3. Connect the inlet capillary to the nebulizer.
Figure 23: Inlet capillary and waste line connected in the detector
77)
78)
76.
5 • Installation
Page 77