Thermo Scientific Vanquish VF-D20 Operating Manual page 137

Vanquish Charged Aerosol Detectors Operating Manual
No. Description
1 Main power switch (on/off control)
2 Fuse holder
3 Power-inlet connector
1. Use the screwdriver to remove the fuse holder.
2. Replace the two fuses with new fuses of the specified type and
current rating. Always replace both fuses.
3. Reinstall the fuse holder.
4. Reconnect the power cord to the power source and to the detector.
5. Turn on the detector with the main power switch.
7 • Maintenance and Service
Page 137