Thermo Scientific Vanquish VF-D20 Operating Manual page 69

Vanquish Charged Aerosol Detectors Operating Manual
5. On the right side of the detector, connect the elbow connectors:
a) On the left port (gas inlet), push the connection stem of the gas
inlet elbow connector (no. 2) into the port (no. 1).
b) On the right port (gas exhaust), push the connection stem of the
gas exhaust elbow connector (no. 4) into the port (no. 3).
c) Slightly pull on each elbow connector to check that they are
properly locked in the ports. If an elbow connector slips out of a
port, push it a little bit further into the port and repeat the
check.
Figure 18: Pushing in the connection unions
No. Description
1 Gas inlet port
2 Gas inlet elbow connector with
gas inlet tubing
5 •
No. Description
3 Gas exhaust port
4 Gas exhaust elbow connector with
gas exhaust tubing
Installation
Page 69