Thermo Scientific Vanquish VF-D20 Operating Manual page 42

4 • Unpacking and Transport
Moving the Detector after Installation
Page 42
9. Some surfaces including the doors of the detector are covered by a
protective film during shipment. Remove the protective film from all
surfaces as applicable.
If you have to move the detector after it has been set up and installed in
the Vanquish system, prepare the detector for transport and move it to
the new location. Follow the instructions in
Shipping the Detector, page
Vanquish Charged Aerosol Detectors Operating Manual
section 7.12 Transporting or
142.