Function Menu For Power Supply; List Function - ITech IT6000C Series User Manual

ООО "Техэнком" Контрольно-измерительные приборы и оборудование

4.6 Function Menu for Power Supply

4.6.1 LIST Function

When the instrument is in Sense Reverse Protection state, you should check
whether the polarities are connected reversely or not firstly. If yes, you can re-
open the output after the polarities connect correctly.
The voltage difference between output terminal and remote sense terminal of
each model is not the same. When the remote sense terminal is connected re-
versely, the maximum voltage will not exceed the sum of output terminal voltage
and the difference voltage.
The Function menu of the power supply includes the following:
Function Function Menu for Power Supply
LIST
BATTERY
Road-Vehicles
SAS
The IT6000C series power supply supports a total of 10 List files (List01 to
List10), each of which can be set up to 200 steps. You need to edit the voltage/
current value, slope and time width of each step, or you can set repeat times (1
to 65535) for each List file. After the file is edited completely, you can trigger the
selected List file to run according to the selected trigger mode.
The descriptions of list function menu are listed in the table below.
LIST List menu
Run Indicates to enter the List run mode, waiting for the trigger to
run the currently selected List file.
Open Select the List file to open.
Copyright © Itech Electronic Co., Ltd.
Power Supply Function
LIST program editing, file import/export, pro-
gram running (see 4.6.1 LIST
Battery charging and discharging testing
function (see 4.6.2 Battery Charging/Dis-
charging Test Function).
Built-in waveform function (see
Waveform Function).
PV simulation function (see
tovoltaic Curve Simulation Function
www.tehencom.com
Function).
4.6.3 Built-in
4.6.4 Solar Pho-
(SAS)).
79