View The System Information (System Info); System Upgrade - ITech IT6000C Series User Manual

ООО "Техэнком" Контрольно-измерительные приборы и оборудование

3.6.10 View the System Information (System Info)

3.7 System Upgrade

Category Parameter
OVP/OCP/OPP/UCP/UVP Delay
time: Delay
UCP/UVP Warm time: Warm-up
This menu item is used to view the system information of the instrument.
The procedures to view the system information are as follows.
1. Press the composite keys [Shift]+[P-set] (System) on the front panel to en-
ter the system menu.
2. Press the Up/Down key or turn the knob to select the System Info and press
[Enter].
You can use Up/Down key or knob to view the following system information.
Parameter
Model
MAC Addr
SN
Main-Ver
Ctrl-Ver
FPGA-Ver
INV-Ver
2017/6/22 0:00
The IT6000C series power supply supports the upgrade of the system version.
System upgrade includes the following two methods:
Copyright © Itech Electronic Co., Ltd.
Description
Display the instrument model.
Display the MAC address, that is, the physical
address.
Display the serial number.
Display the system version information.
Display the version information for a single
module.
Display the FPGA version information.
Display the control board version information.
Display the system time.
www.tehencom.com
Basic Operation
Initial Value
60s
60