ITech IT6000C Series User Manual page 160

ООО "Техэнком" Контрольно-измерительные приборы и оборудование
The type of the fuse The way to replace
3. After replacement, mount the fuse block to
1. Push and turn the fuse box anti-clockwise
2. The fuse box will bounce up, then you can
3. Please replace with a fuse of the same
4. When install, put into the fuse box firstly.
Copyright © Itech Electronic Co., Ltd.
the original position, as illustrated below.
by hand. When turned to 90 degrees, re-
lease the screwdriver.
see the fuse in it. Take out the blown fuse.
specification. Refer to the technical specifi-
cation of the corresponding instrument.
Then Push and turn the fuse box to 90 de-
grees clockwise.
www.tehencom.com
Appendix
149