ITech IT6000C Series User Manual page 30
Bi-directional programmable dc power supply
Hide thumbs
Also See for IT6000C Series:
- User manual (177 pages) ,
- User manual (211 pages) ,
- User manual (251 pages)
Table of Contents
Advertisement
ООО "Техэнком"
Контрольно-измерительные приборы и оборудование
Exception Handling
If the instrument cannot start normally, please check and take measures by
reference to steps below.
1. Check whether the power cord is correctly connected and confirm whether
the instrument is powered.
2. Check whether the power in On. The power switch is under "|" On status.
3. Check whether the power voltage matches with the supply voltage. Please
refer to
1.3 Connecting the Power Cord
4. If you need additional assistance, contact ITECH technical support engineer.
Copyright © Itech Electronic Co., Ltd.
www.tehencom.com
to select proper AC input.
Quick Start
19
Advertisement
Table of Contents
Need help?
Do you have a question about the IT6000C Series and is the answer not in the manual?
Questions and answers