Function Menu For Power Supply; List Function - ITech IT6000C Series User Manual

4.6 Function Menu for Power Supply

The Function menu of the power supply includes the following:
Function

4.6.1 LIST Function

The IT6000C series power supply supports a total of 10 List files (List01 to
List10), each of which can be set up to 200 steps. You need to edit the voltage/
current value, slope and time width of each step, or you can set repeat times (1
to 65535) for each List file. After the file is edited completely, you can trigger the
selected List file to run according to the selected trigger mode.
The descriptions of list function menu are listed in the table below.
LIST
Function Menu for Power Supply
LIST
BATTERY
Road-Vehicles
SAS
Battery Emulator
List menu
Run Indicates to enter the List run mode, waiting for the trigger to
run the currently selected List file.
Open Select the List file to open.
USB Open the List file in the external USB flash disk.
Load
Not-Load
Copyright © Itech Electronic Co., Ltd.
LIST program editing, file import/export, pro-
gram running (see 4.6.1 LIST
Battery charging and discharging testing
function (see 4.6.2 Battery Charging/Dis-
charging Test Function).
Built-in waveform function (see
Waveform Function).
PV simulation function (see
tovoltaic Curve Simulation Function
Battery simulation test function (see
Battery Simulation Function).
Import the List file from the exter-
nal USB flash disk into the
instrument.
Cancel the import operation.
Power Supply Function
Function).
4.6.3 Built-in
4.6.4 Solar Pho-
(SAS)).
4.6.5
57