ITech IT6000C Series User Manual page 69

ООО "Техэнком" Контрольно-измерительные приборы и оборудование
Table 3–3 Initial value of the parameter
Category Parameter
Voltage setting: Vs
Main
interface
Current setting: Is
Upper limit of voltage: Vh, and
lower limit of voltage: Vl
Upper limit of current: I+, and
lower limit of current: I-
Upper limit of power: P+, and
lower limit of power: P-
[On/Off] status
System Beep
menu
PowerOn
Sense
ListTrig Source
DataLogger Trig Source
I/O Con
Copyright © Itech Electronic Co., Ltd.
www.tehencom.com
Basic Operation
Initial Value
One percent of the rated
voltage of the
instrument
One percent of the rated
current of the instrument
Upper limit value: One
percent of the rated volt-
age of the instrument
Lower limit value: 0
One percent of the rated
current of the instrument
Rated power value of
the instrument
Off
On
Reset
Off
Manual
Manual
•
LAN→IP-Conf
•
IP Addr:
192.168.0.1
•
SubNet:
255.255.255.0
•
Gateway:
192.168.0.1
•
DNS1/DNS2:
0.0.0.0
•
Socket Port:
30000
LAN→Serv-Conf
58