ITech IT6000C Series User Manual page 35

ООО "Техэнком" Контрольно-измерительные приборы и оборудование
Select the Trigger Method
Menu Item Description
Data Type This parameter indicates the type of
recorded data, including:
•
•
2. Set the value of Sample Period and press [Enter].
3. Set the value of Duration and press [Enter].
4. Set the value of Source and press [Enter].
5. Set the value of Data Type and press [Enter].
At this point, the VFD screen returns to the main interface of the system.
See the steps in the 3.6.4 Select Trigger Source (Trig Source)
how the data logging is triggered.
This setting result is only valid for data recording function. When List function
is used, the method for triggering the running of List files needs to be addi-
tionally set (by default, triggered by the panel).
Copyright © Itech Electronic Co., Ltd.
Average: This is the default se-
lected data type, namely, the
average of all data acquired in the
data recording period as indicated
in the table of saved data.
Max/Min: If this option is se-
lected, it means the maximum
value and minimum value of data
acquired in the data recording pe-
riod as indicated in the data sav-
ing table.
www.tehencom.com
Basic Operation
Setting
section to set
24