ITech IT6000C Series User Manual page 91

ООО "Техэнком" Контрольно-измерительные приборы и оборудование
USB Open the List file in the external USB flash disk.
Load
Not-Load
Internal Open the List file stored inside the instrument.
Recall Inner
File
Export Export the internal List file of the instrument to an external
USB flash drive.
File The name of the exported list file. The default suf-
Name fix is .csv, and the file name can only be a string
of numbers.
Edit Edit list program.
CC / CV Set the operation mode for list program: CC prior-
ity or CV priority.
Step The total number of steps included in the List
Count program.
Step 1 Current value or voltage value setting for Step1.
Value (The voltage appears when CV priority is se-
lected; the current appears when CC priority is
selected.)
Step 1 Slope value setting for Step1.
Slope
Step 1 Dwell time setting for Step1.
Width
Repeat Set the number of list file repetitions.
End Set the running state after the list program is run-
State ning over.
Last
Copyright © Itech Electronic Co., Ltd.
www.tehencom.com
Power Supply Function
Import the List file from the exter-
nal USB flash disk into the
instrument.
Cancel the import operation.
Set the name of the recalled List
file.
After the List program finishes run-
ning, the output is kept as the set-
ting in the last step, and the
working mode remains as the set-
ting in the List file.
80