Protecting The Server By Using The Rccmd Software; Introduction To The Software; Rccmd Event Shutdown And Message Sending - Huawei RMS-SNMP01A User Manual

RMS-SNMP01A SNMP Card
User Manual
9

9.1 Introduction to the Software

The RCCMD shutdown software is part of the centralized monitoring system of the Generex
network. The UPS2000 SNMP card integrates the functions of the Generex RCCMD server:



For the method of installing the RCCMD client, see the manual related to the RCCMD.

9.2 RCCMD Event Shutdown and Message Sending

Procedure
Step 1 On the RCCMD client, choose Connections, add the SNMP card IP address, and set the
encryption mode to encryption, as shown in
Issue 08 (2020-01-09)
Protecting the Server by Using the
Sends a shutdown command, notification message, execution command, or trap message
to the RCCMD client.
Receives the message "UPS alive check" sent by the RCCMD client and replies with the
system status.
Configures and saves the address and port for receiving the shutdown command, and the
message sending mechanism.
 If encryption is disabled, you do not need to select the encrypted transmission.
 All configurations take effect only after restart.
Copyright © Huawei Technologies Co., Ltd.

9 Protecting the Server by Using the RCCMD Software

RCCMD Software
Figure 9-1.
66