Configure Temperature Measurement; Configure Temperature Measurement Unit; Configure Temperature Damping - Emerson Micro Motion 1700 Configuration And Use Manual

Configure process measurement
4.6

Configure temperature measurement

The temperature measurement parameters control how temperature data from the
sensor is reported.
4.6.1

Configure Temperature Measurement Unit

Display
ProLink III
Field Communicator Configure > Manual Setup > Measurements > Temperature > Temperature Unit
Overview
Temperature Measurement Unit specifies the unit that will be used for temperature
measurement.
Procedure
Set Temperature Measurement Unit to the option you want to use.
The default setting is Degrees Celsius.
Options for Temperature Measurement Unit
The transmitter provides a standard set of units for Temperature Measurement Unit.
Different communications tools may use different labels for the units.
Unit description
Degrees Celsius
Degrees Fahrenheit
Degrees Rankine
Kelvin
4.6.2

Configure Temperature Damping

Display
ProLink III
Field Communicator Configure > Manual Setup > Measurements > Temperature > Temp Damping
44
OFF-LINE MAINT > OFF-LINE CONFG > UNITS > TEMP
Device Tools > Configuration > Process Measurement > Temperature
Display
°C
°F
°R
°K
Not available
Device Tools > Configuration > Process Measurement > Temperature
Micro Motion Model 1700 Transmitters with Analog Outputs
Label
Field Communica-
ProLink III tor
°C degC
°F degF
°R degR
°K Kelvin