Configure Sensor Liner Material; Configure Sensor Flange Type - Emerson Micro Motion 1700 Configuration And Use Manual

Configure device options and preferences
Procedure
1.
2.
5.6.3

Configure Sensor Liner Material

Display
ProLink III
Field Communicator Configure > Manual Setup > Info Parameters > Sensor Information > Tube Lining
Overview
Sensor Liner Material lets you store the type of material used for your sensor liner in
transmitter memory. This parameter is not used in processing and is not required.
Procedure
1.
2.
5.6.4

Configure Sensor Flange Type

Display
ProLink III
Field Communicator Configure > Manual Setup > Info Parameters > Sensor Information > Sensor Flange
Overview
Sensor Flange Type lets you store your sensor's flange type in transmitter memory. This
parameter is not used in processing and is not required.
Procedure
1.
2.
68
Obtain the material used for your sensor's wetted parts from the documents
shipped with your sensor, or from a code in the sensor model number.
To interpret the model number, refer to the product data sheet for your sensor.
Set Sensor Material to the appropriate option.
Not available
Device Tools > Configuration > Informational Parameters > Sensor
Obtain your sensor's liner material from the documents shipped with your sensor, or
from a code in the sensor model number.
To interpret the model number, refer to the product data sheet for your sensor.
Set Sensor Liner Material to the appropriate option.
Not available
Device Tools > Configuration > Informational Parameters > Sensor
Obtain your sensor's flange type from the documents shipped with your sensor, or
from a code in the sensor model number.
To interpret the model number, refer to the product data sheet for your sensor.
Set Sensor Flange Type to the appropriate option.
Micro Motion Model 1700 Transmitters with Analog Outputs