Integrate The Meter With The Control System; Configure The Transmitter Channels - Emerson Micro Motion 1700 Configuration And Use Manual

6 Integrate the meter with the control
system
Topics covered in this chapter:
•
•
•
•
•
•
6.1

Configure the transmitter channels

Display
ProLink III
Field Communicator Configure > Manual Setup > Inputs/Outputs > Channels > Channel B
Overview
You can configure Channel B on your transmitter to operate as a Frequency Output or a
Discrete Output. The channel configuration must match the wiring at the transmitter
terminals.
Prerequisites
To avoid causing process errors:
•
•
Procedure
Set Channel B as desired.
Option
Frequency Output
Discrete Output
Configuration and Use Manual
Configure the transmitter channels
Configure the mA Output
Configure the Frequency Output
Configure the Discrete Output
Configure events
Configure digital communications
OFF-LINE MAINT > OFF-LINE CONFG > IO > CH B
Device Tools > Configuration > I/O > Outputs
Configure the channels before configuring the outputs.
Before changing the channel configuration, ensure that all control loops affected by
the channel are under manual control.
Description
Channel B will operate as a Frequency Output.
Channel B will operate as a Discrete Output.

Integrate the meter with the control system

71