Emerson Micro Motion 1700 Configuration And Use Manual page 32

Configure process measurement
Prerequisites
Before you configure Volume Flow Measurement Unit, be sure that Volume Flow Type is
set to Liquid.
Procedure
Set Volume Flow Measurement Unit to the unit you want to use.
The default setting for Volume Flow Measurement Unit is l/sec (liters per second).
Tip
If the measurement unit you want to use is not available, you can define a special measurement unit.
Options for Volume Flow Measurement Unit for liquid
applications
The transmitter provides a standard set of measurement units for Volume Flow
Measurement Unit, plus one user-defined measurement unit. Different communications
tools may use different labels for the units.
Unit description
Cubic feet per second
Cubic feet per minute
Cubic feet per hour
Cubic feet per day
Cubic meters per second
Cubic meters per minute
Cubic meters per hour
Cubic meters per day
U.S. gallons per second
U.S. gallons per minute
U.S. gallons per hour
U.S. gallons per day
Million U.S. gallons per day
Liters per second
Liters per minute
Liters per hour
Million liters per day
Imperial gallons per second
Imperial gallons per minute
24
Display ProLink III
CUFT/S ft3/sec
CUF/MN ft3/min
CUFT/H ft3/hr
CUFT/D ft3/day
M3/S m3/sec
M3/MIN m3/min
M3/H m3/hr
M3/D m3/day
USGPS US gal/sec
USGPM US gal/min
USGPH US gal/hr
USGPD US gal/day
MILG/D mil US gal/day
L/S l/sec
L/MIN l/min
L/H l/hr
MILL/D mil l/day
UKGPS Imp gal/sec
UKGPM Imp gal/min
Micro Motion Model 1700 Transmitters with Analog Outputs
Label
Field Communicator
Cuft/s
Cuft/min
Cuft/h
Cuft/d
Cum/s
Cum/min
Cum/h
Cum/d
gal/s
gal/min
gal/h
gal/d
MMgal/d
L/s
L/min
L/h
ML/d
Impgal/s
Impgal/min