Emerson Micro Motion 1700 Configuration And Use Manual page 81

•
Procedure
Set mA Output Process Variable as desired.
The default setting is Mass Flow Rate.
Postrequisites
If you changed the setting of mA Output Process Variable, verify the settings of Lower
Range Value (LRV) and Upper Range Value (URV).
Options for mA Output Process Variable
The transmitter provides a basic set of options for mA Output Process Variable, plus
several application-specific options. Different communications tools may use different
labels for the options.
Table 6-1: Standard mA Output process variables
Process variable
Gas standard volume flow
rate
Mass flow rate
Volume flow rate
Table 6-2: PVR mA Output process variables
Process variable
Uncorrected oil flow
Uncorrected water cut
Uncorrected water flow
Corrected oil flow
Corrected water cut
Corrected water flow
Shrinkage factor corrected
net oil at line
Shrinkage factor corrected
net oil at 60F
Configuration and Use Manual
If you have configured Display Variable 1 to track mA Output Process Variable, be
aware that changing the configuration of mA Output Process Variable will change
the contents of Display Variable 1.
Display
GSV F
MFLOW
VFLOW
Display
OIL
WATER%
WATER
OIL60
WCT60%
WTR60
SFOIL
SFO60
Integrate the meter with the control system
Label
ProLink III
Gas Standard Volume Flow Rate Gas vol flo
Mass Flow Rate
Volume Flow Rate
Label
ProLink III
Oil Flow Rate At Line
Water Cut At Line
Water Flow Rate At Line
Oil Flow Rate At Reference
Water Cut At Reference
Water Flow Rate At Reference
SF Oil Flow Rate At Line
SF Oil Flow Rate At Reference
Field Communicator
Mass flo
Vol flo
Field Communicator
Oil Flow Rate at Line
Water Cut at Line
Water Flow Rate at Line
Oil Flow Rate at Reference
Water Cut at Reference
Water Flow Rate at Reference
Shrinkage Factor Oil Flow Rate
at Line
Shrinkage Factor Oil Flow Rate
at Reference
73