Configure Response Time Parameters - Emerson Micro Motion 1700 Configuration And Use Manual

3.
4.
5.
5.4

Configure response time parameters

You can configure the rate at which process data is polled and process variables are
calculated.
Configuration and Use Manual
Option Description
Disabled Operator cannot access the alert menu.
Note
The transmitter status LED changes color to indicate that there are active alerts, but does not
show specific alerts.
To require a password for access to the maintenance section of the off-line menu
and the Smart Meter Verification menu, enable or disable Off-Line Password.
Option Description
Enabled
Operator is prompted for the off-line password at entry to the Smart Meter
Verification menu (if applicable) or entry to the maintenance section of the
off-line menu.
Disabled (de- No password is required for entry to the Smart Meter Verification menu (if
applicable) or entry to the maintenance section of the off-line menu.
fault)
To require a password to access the alert menu, enable or disable Alert Password.
Option Description
Enabled
Operator is prompted for the off-line password at entry to the alert
menu.
Disabled (default) No password is required for entry to the alert menu.
If both Off-Line Password and Alert Password are enabled, the operator is prompted
for the off-line password to access the off-line menu, but is not prompted
thereafter.
Set Off-Line Password to the desired value.
The default value is 1234. The range is 0000 to 9999.
The same value is used for both the off-line password and the alert password.
Tip
Record your password for future reference.
Configure device options and preferences
59