Display Codes For Process Variables - Emerson Micro Motion 1700 Configuration And Use Manual

4.
5.
6.
A.4

Display codes for process variables

Table A-2: Display codes for process variables
Code Definition
AVE_D Average density
AVE_T Average temperature
BRD_T Board temperature
CONC Concentration
DRIVE% Drive gain
EXT_P External pressure
EXT_T External temperature
FVZ Field verification zero
GSV F Gas standard volume flow
GSV I Gas standard volume inventory
GSV T Gas standard volume total
LPO_A Left pickoff amplitude
Configuration and Use Manual
d. Activate Scroll until the desired character is displayed.
e. Activate Select to move the cursor one digit to the left.
f. Activate Scroll until the desired character is displayed.
g. Activate Select to move the cursor one digit to the left.
h. Activate Scroll until the desired character is displayed.
Enter the sign.
a. Activate Select to move the cursor one digit to the left.
b. Activate Scroll until the desired character is displayed.
For positive numbers, select a blank space.
To save the displayed value to transmitter memory, activate Scroll and Select
simultaneously and hold until the display changes.
• If the displayed value is the same as the value in transmitter memory, you will be
returned to the previous screen.
• If the displayed value is not the same as the value in transmitter memory, SAVE/
YES? flashes on the display. Activate Select.
Switch back from exponential notation to decimal notation.
a. Activate Select until the E is flashing.
b. Activate Select until d is displayed.
c. Activate Select.
Using the transmitter display
Comment or reference
Petroleum measurement application only
Petroleum measurement application only
Concentration measurement application only
Weights & Measures application only
195