Siemens SINUMERIK 804D sl Commissioning Manual page 88

Commissioning SINAMICS drives
8.6 Commissioning using a drive wizard
Figure 8-40
17. Select the assignment for the terminal for Input 2. AUS2 (see NCU 7x0 and NX1x
18. Press "Next >".
Figure 8-41
19. The configuration of the drive module with SMI is completed. You can check the
20. Press the "Finish >" softkey.
88
Menu "Drives > Configuration" "BICO connections (SMI)" (Next 6)
Terminal Assignment (Page 270) ).
Menu "Drives > Configuration" "Summary (SMI)" (Next 7)
configuration in the summary.
CNC Part 1 (NCK, PLC, drive)
Commissioning Manual, 11/2006, 6FC5397-2AP10-2BA0