Siemens SINUMERIK 804D sl Commissioning Manual page 74

Commissioning SINAMICS drives
8.6 Commissioning using a drive wizard
Figure 8-16
Figure 8-17
7. This completes the configuration for the infeed. You can check the configuration in the
8. Press the "Finish >" softkey.
74
Menu "Infeed > Configuration" "BICO terminal wiring" (Next 3)
Menu "Infeed > Configuration" "Summary" (Next 4)
summary.
The HMI transfers the configuration to the infeed and saves it.
CNC Part 1 (NCK, PLC, drive)
Commissioning Manual, 11/2006, 6FC5397-2AP10-2BA0