5. Follow the drive wizard with the horizontal softkey "Next >".
6. The default values in the following dialogs are standard values an can be taken over with
Figure 8-14
Figure 8-15
CNC Part 1 (NCK, PLC, drive)
Commissioning Manual, 11/2006, 6FC5397-2AP10-2BA0
"Next >".
Menu "Infeed > Configuration" with recognized ALM (Next 1)
Menu "Infeed > Configuration" "Additional data" (Next 2)
Commissioning SINAMICS drives
8.6 Commissioning using a drive wizard
73