Siemens SINUMERIK 804D sl Commissioning Manual page 82

Commissioning SINAMICS drives
8.6 Commissioning using a drive wizard
Figure 8-29
23. Select the assignment for the terminal for Input 2. AUS2 (see NCU 7x0 and NX1x
24. Press "Next >".
Figure 8-30
25. The configuration of the drive module with externally supplied motor is completed. You
26. Press the "Finish >" softkey.
Figure 8-31
82
Menu "Drives > Configuration" "BICO connection" (Next 8)
Terminal Assignment (Page 270) ).
Menu "Drives > Configuration" "Summary" (Next 9)
can check the configuration in the summary.
Menu "Drives > Configuration" "...save permanently..." (Finish)
CNC Part 1 (NCK, PLC, drive)
Commissioning Manual, 11/2006, 6FC5397-2AP10-2BA0