Commissioning NCU 7x0 with external HMI
The following figure illustrates an example of a hardware and software arrangement for the
commissioning of an NCU 7x0 with PCU 50.3 with external HMI.
Figure 1-3
CNC Part 1 (NCK, PLC, drive)
Commissioning Manual, 11/2006, 6FC5397-2AP10-2BA0
1.2 Principle representation of SINUMERIK 840D sl components for commissioning
Principle representation of SINUMERIK 840D sl with PCU 50.3
Introduction
17