Setting And Removing A Password - Siemens CLINITEK Status+ Operator's Manual

Setting
Color & Clarity
entry required
Display results by
Patient Name or
Patient ID
Output of
instrument serial
number with
results data
Power Save
Printer
Sound

Setting and Removing a Password

You can set a password to protect the Instrument Set Up settings. After
you set a password, you cannot make changes to the Instrument Set
Up settings until you enter the password. You can remove the
password.
To set a password, perform the following steps:
1. On the Select Ready screen, select Instrument Set Up.
2. On the Choose Settings screen, select Set Password.
3. Enter a password using the alphabetic and/ or numeric onscreen
keyboards (maximum of 12 characters).
If you change your mind and do not want to enter a password,
select the left arrow key (Back) on the alphabetic keyboard. The
Choose Settings screen displays.
Note Be sure to keep a record of the password so that you can
access Instrument Set Up. If you lose your password, call your local
technical support provider or distributor.
4. Select Enter.
5. Select Done.
To remove a password, perform the following steps:
1. On the Select Ready screen, select Instrument Set Up.
94
Spanish Swedish
None None
Patient Patient
Name Name
Disabled Disabled
Disabled Disabled
Automatic Automatic
Enabled Enabled
CLINITEK Status+ Analyzer Operator's Guide
Japanese Chinese
None None
Patient Patient
Name Name
Disabled Disabled
Disabled Disabled
Automatic Automatic
Enabled Enabled