Specifying The Sensor Type For Penningvac Sensors - LEYBOLD GRAPHIX ONE Instruction Manual

7.1.1.2

Specifying the Sensor Type for PENNINGVAC Sensors

Sensor Type PTR?
When connecting the following PENNINGVAC sensors then during first-time commissioning
PTR? is displayed as the sensor type in the left bottom area of the display field for the
measurement channel:
 PTR81N
 PTR225
 PTR225N
 PTR225S
 PTR225SN
 PTR237
 PTR237N
To specify the connected sensor proceed as follows:
 Press in the measurement mode the touchscreen surface for approximately 1 second.
o The main menu with an overview of the parameter groups is displayed.
 Tap in the main menu on the parameter group of the desired channel.
o The parameters available for this parameter group are displayed.
GA300550402_002_C1 – 10/2016
Figure 50 – Display of sensor type PTR?
Figure 51 – Opening the main menu
Figure 52 – Selection of parameter group Channel
61