Specifying The Sensor Type For Thermovac Sensors - LEYBOLD GRAPHIX ONE Instruction Manual

7.1.1.1

Specifying the Sensor Type for THERMOVAC Sensors

Sensor Type TTR?
When connecting the following THERMOVAC sensors then during first-time commissioning
TTR? is displayed as the sensor type in the left bottom area of the display field for the
measurement channel:
 TTR81N
 TTR90
 TTR91
 TTR91N
 TTR96S
 TTR96SN
To specify the connected sensor proceed as follows:
 Press in the measurement mode the touchscreen surface for approximately 1 second.
o The main menu with an overview of the parameter groups is displayed.
 Tap in the main menu on the parameter group of the desired channel.
o The parameters available for this parameter group are displayed.
GA300550402_002_C1 – 10/2016
 TTR211
 TTR216S
 TTR911
 TTR911N
 TTR916

TTR916N
Figure 38 – Display of sensor type TTR?
Figure 39 – Opening the main menu
Figure 40 – Selection of parameter group Channel
57