Port Configuration - SMC Networks TigerStack 100 1000BASE-X Management Manual

W -B M
EB ASED ANAGEMENT

Port Configuration

Use the Port Configuration menu to configure any port on the switch.
Parameter
Flow Control
Mode
(on all ports)
Admin Status
Duplex Status
3-46
Default Description
Disabled See "Flow Control Status" in this table.
Enable Allows you to disable a port due to abnormal
behavior, and then re-enable it after the problem
has been resolved. You may also disable a port
for security reasons.
100M Used to set the current port speed and duplex
Full-Duplex mode.
The MT-RJ ports have a default setting of
100 Mbps full duplex. Auto-negotiation is the
default setting for 1000BASE-T, 1000BASE-SX
and 1000BASE-LX; but is not available for
100BASE-FX.