U
S
SING THE
YSTEM
Menu
SQE Test Errors*
Deferred
Transmissions*
Late Collisions
Excessive Collisions*
Internal Mac
Transmit Errors*
Carrier Sense Errors*
Frames Too Long
Internal Mac
Receive Errors*
* The reported values will always be zero because these statistics are not supported
by the internal chip set.
Note: Statistics are automatically refreshed every five seconds (see page 2-17).
2-68
C
ONFIGURATION
Description
A count of times that the SQE TEST ERROR message
is generated by the PLS sublayer.
A count of frames for which the first transmission
attempt on a particular interface is delayed because the
medium was busy.
The number of times that a collision is detected later
than 512 bit-times into the transmission of a packet.
The number of frames for which transmission failed
due to excessive collisions.
The number of frames for which transmission failed
due to an internal MAC sublayer transmit error.
The number of times that the carrier sense condition
was lost or never asserted when attempting to transmit
a frame.
The number of frames received that exceed the
maximum permitted frame size.
The number of frames for which reception failed due to
an internal MAC sublayer receive error.
P
ROGRAM
Need help?
Do you have a question about the TigerStack 100 1000BASE-X and is the answer not in the manual?
Questions and answers