Configuring Port Parameters - SMC Networks TigerStack 100 1000BASE-X Management Manual

U S
SING THE YSTEM

Configuring Port Parameters

Use the Port Configuration menus to set or display communication
parameters for any port or module in the stack.
Port
--------------------------------------------------------
1
2
3
4
5
6
7
8
9
10
11
12
<APPLY> <OK> <CANCEL> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>
Use <TAB> or arrows keys to move. <Space>
Parameter
Flow Control
on all ports
Type
Admin
2-30
C
ONFIGURATION
Port Configuration : Unit 1 Port
==================
Flow Control on all ports : [Enable] [Disable]
Type Admin
100FX ENABLED
100FX ENABLED
100FX ENABLED
100FX ENABLED
100FX ENABLED
100FX ENABLED
100FX ENABLED
100FX ENABLED
100FX ENABLED
100FX ENABLED
100FX ENABLED
100FX ENABLED
Default Description
Disabled See "Flow Control" in this table.
Shows port type as:
100FX
1000SX
1000LX
1000T
Enabled Allows you to disable a port due to abnormal behavior
(e.g., excessive collisions), and then re-enable it after
the problem has been resolved. You may also disable
a port for security reasons.
P
ROGRAM
1 - 12
Flow Control
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
: 100BASE-FX
: 1000BASE-SX
: 1000BASE-LX
: 1000BASE-T
Speed and Duplex
100_FULL
100_FULL
100_FULL
100_FULL
100_FULL
100_FULL
100_FULL
100_FULL
100_FULL
100_FULL
100_FULL
100_FULL
to scroll options.