SMC Networks TigerStack 100 1000BASE-X Management Manual page 53

Parameter Default
Spanning Tree Enabled
Protocol
Priority 32,768
Hello Time 2
Description
Enable this parameter to participate in a STA
compliant network.
Device priority is used in selecting the root device,
root port, and designated port. The device with the
highest priority becomes the STA root device.
However, if all devices have the same priority, the
device with the lowest MAC address will then
become the root device.
Enter a value from 0 - 65535.
Remember that the lower the numeric value, the
higher the priority.
Time interval (in seconds) at which the root device
transmits a configuration message.
The minimum value is 1.
The maximum value is
the lower of 10 or [(Max. Message Age / 2) -1].
C
ONFIGURING THE
S
WITCH
2-35