802.1Q Vlan Current Table Information - SMC Networks TigerStack 100 1000BASE-X Management Manual

Parameter
MAX Supported VLANs Maximum number of VLANs that can be configured
Current Number of
VLANs Configured

802.1Q VLAN Current Table Information

This screen shows the current port members of each VLAN and whether
or not the port supports VLAN tagging. Ports assigned to a large VLAN
group that crosses several switches should use VLAN tagging. However, if
you just want to create a small port-based VLAN for one or two switches,
you can assign ports to the same untagged VLAN. The current
configuration is shown in the following screen.
802.1Q VLAN Current Table Information
=====================================
Deleted VLAN Entry Counts : 0
VID
--------------------------------------------------
1
Unit Current Egress Ports
1. 111111111111 111111111111 ---- 111111111111 111111111111 ----
2. ------------ ------------ ---- ------------ ------------ ----
3. ------------ ------------ ---- ------------ ------------ ----
4. ------------ ------------ ---- ------------ ------------ ----
5. ------------ ------------ ---- ------------ ------------ ----
6. ------------ ------------ ---- ------------ ------------ ----
Sorted by VID : 1
[Show]
Use <TAB> or arrow keys to move. <Enter> to select.
Parameter
Deleted VLAN Entry
Counts
VID
Description
on this switch.
The number of VLANs currently configured on this
switch.
Creation Time
0 (0 day 0 hr 0 min 0 sec)
Port 1 Port 13 Port 25
[More]
<OK>
Description
The number of times a VLAN entry has been deleted
from this table.
The ID for the VLAN currently displayed.
C
ONFIGURING THE
Status
Permanent
Current Untagged Ports
S
WITCH
2-57