Configuring Community Names - SMC Networks TigerStack 100 1000BASE-X Management Manual

U S
SING THE YSTEM

Configuring Community Names

The following figure and table describe how to configure the community
strings authorized for management access. Up to 5 community names may
be entered.
<APPLY>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
Community Name
Access
Status
Note: The default community string is "public" with Read/Write access.
2-20
C
ONFIGURATION
SNMP Configuration : SNMP Communities
=====================================
Community Name
1. public
2.
3.
4.
5.
Description
A community entry authorized for management access.
Maximum string length : 20 characters
Management access is restricted to Read Only or Read/
Write.
Sets administrative status of entry to enabled or
disabled.
P
ROGRAM
Access
READ/WRITE
<OK>
Status
ENABLED
<CANCEL>