Download Print this page

SMC Networks EZ Net 16SW EZNET-16SW Specification Sheet

16 and 24-port 10/100mbps standalone unmanaged layer 2 switches

Advertisement

Quick Links

Unmanaged Switch
OVERVIEW
This EZNET series offers 16- and 24-port 10/100Mbps
standalone, unmanaged switches. Designed specifically
for home and small office applications, these switches
feature auto-negotiation, auto-MDIX ports for easy
network expansion and provide full bandwidth capability
on each port. With fully auto-negotiating 10/100 ports,
the speed and duplex modes of attached devices are
instantly detected, allowing the switches to auto-
configure for optimal performance.
FEATURES
3.2 or 4.8Gbps aggregate bandwidth; speeds up to
200Mbps per port
Filtering & forwarding all full-wire speed on all ports
Buffered store-and-forward transmission method prevents
propagation of bad packets
Back pressure and flow control prevent packet loss
under heavy load.
Sturdy steel construction; rackmountable
www.smc.com
EZNET-16SW / EZNET-24SW
EZNET
TM
16 and 24-Port 10/100Mbps Standalone Unmanaged Layer 2 Switches
These switches offer flexibility for any business while
ensuring feature-rich and value-added support. Every
port can automatically adjust and link to either a PC
station or another switch, no need for crossover cables.
Rackmountable or desktop, these switches are ideal for
any office or addition to existing network worgroups.
BENEFITS
Plug-and-play—no complicated setup procedures
or cabling requirements
Integrates Ethernet and Fast Ethernet networks
At-a-glance LEDs show port status and monitor network activity
Auto-negotiation – chooses optimal speed and operating
mode for attached devices
Address learning probes the network and automatically
configures the switch

Advertisement

loading
Need help?

Need help?

Do you have a question about the EZ Net 16SW EZNET-16SW and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SMC Networks EZ Net 16SW EZNET-16SW

  • Page 1 Every port can automatically adjust and link to either a PC station or another switch, no need for crossover cables. Rackmountable or desktop, these switches are ideal for any office or addition to existing network worgroups.
  • Page 2 TECHNICAL SPECIFICATIONS PORTS • EZNET-24SW • 24 RJ-45 ports, auto-sensing • EZNET-16SW • 16 RJ-45 ports, auto-sensing • Power- one • Link/Activity - Per port • 10/100 - Per port NETWORK INTERFACE • 10Base-T RJ-45; Category 3,4,5 UTP cable • 100Base-tx RJ-45; Category 5 UTP cable POWER CONSUMPTION •...

This manual is also suitable for:

Ez net 24sw eznet-24swEznet-16swEznet-24sw