VLAN Management
Use the VLAN Management screen to define which VLAN has
management access to the switch. Parameters shown on this screen are
indicated in the following figure and table:
Parameter
CPU Join VLAN All
VLAN ID
Default
Description
Select ALL to give all VLANs access to switch
management, or ONE to restrict access to a
specified VLAN. If you select just one
VLAN, you must specify its VLAN ID on the
following line.
1
Specifies the VLAN ID that has access to
switch management.
VLAN M
ANAGEMENT
3-33
Need help?
Do you have a question about the TigerStack 100 1000BASE-X and is the answer not in the manual?
Questions and answers